Lexmark 6500e User Manual page 167

Understanding the printer menus
Use
Timeouts
Wait Timeout
15–65535
Disabled
Timeouts
Job Hold Timeout
5–255
Print Recovery
Auto Continue
Disabled
5–255
Print Recovery
Jam Recovery
Auto
On
Off
Print Recovery
Page Protect
Off
On
Press Sleep Button
Sleep
Do nothing
Press and Hold Sleep Button
Do nothing
Sleep
To
Set the amount of time in seconds the printer waits for additional
data before canceling a print job.
Notes:
•
40 is the factory default setting.
• Wait Timeout is available only when the printer is using
PostScript emulation. This setting has no effect on PCL
emulation print jobs.
Set the amount of time in seconds the scanner waits for user
intervention before it holds jobs that require unavailable resources.
Notes:
•
30 is the factory default setting.
•
This menu appears only when a scanner hard disk is
installed.
Let the printer automatically continue printing from certain offline
situations when these are not resolved within the specified time
period.
Note: Disabled is the factory default setting.
Specify whether the printer reprints jammed pages.
Notes:
•
Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
• On sets the printer to always reprint jammed pages.
•
Off sets the printer to never reprint jammed pages.
Successfully print a page that may not have printed otherwise.
Notes:
•
Off is the factory default setting. This prints a partial page
when there is not enough memory to print the whole page.
•
On sets the printer to process the whole page so that the
entire page prints.
Determine how the scanner and printer, while in idle state, react
to a short press of the Sleep button.
Note: Sleep is the factory default setting.
Determine how the scanner and printer, while in idle state, react
to a long press of the Sleep button.
Note: Do nothing is the factory default setting.
167