Creating An E-Mail Shortcut - Lexmark 6500e User Manual

E-mailing
3
Fill in the fields with the appropriate information.
4
Click Submit.

Creating an e-mail shortcut

Creating an e-mail shortcut using the Embedded Web Server
1
Type the scanner IP address or host name in the address field of your Web browser.
If you do not know the IP address or host name of the scanner, then you can:
•
View the information on the scanner control panel home screen or in the TCP/IP section under the
Network/Ports menu.
•
Print a network setup page or menu settings page and locate the information in the TCP/IP section.
2
Click Settings.
3
Under Other Settings, click Manage Shortcuts > E‑mail Shortcut Setup.
4
Type a unique name for the recipient, and then enter the e-mail address.
Note: If you are entering multiple addresses, then separate each address with a comma (,).
5
Select the scan settings (Format, Content, Color, and Resolution).
6
Enter a shortcut number, and then click Add.
If you enter a number that is already in use, then you are prompted to select another number.
Creating an e-mail shortcut using the touch screen
1
From the home screen, navigate to:
E-mail > Recipient > type an e‑mail address
To create a group of recipients, touch Next address, and then type the next recipient's e-mail address.
2
Touch .
3
Type a unique name for the shortcut, and then touch Done.
4
Verify that the shortcut name and number are correct, and then touch OK.
If the name or number is incorrect, then touch Cancel, and then reenter the information.
100