Smtp Setup Menu - Lexmark 6500e User Manual

Understanding the printer menus
Menu item
Baud
9600
19200
38400
57600
115200
138200
172800
230400
345600
1200
2400
4800
Data Bits
8
7
Parity
None
Ignore
Even
Odd
Honor DSR
Off
On

SMTP Setup menu

Menu item
Primary SMTP Gateway
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
SMTP Timeout
5–30
Reply Address
Description
Specifies the rate at which data can be received through the serial port
Notes:
•
9600 is the factory default setting.
•
138200, 172800, 230400, and 345600 baud rates are only displayed in the
Standard Serial menu. These settings do not appear in the Serial Option 1,
Serial Option 2, or Serial Option 3 menus.
Specifies the number of data bits sent in each transmission frame
Note: 8 is the factory default setting.
Sets the parity for serial input and output data frames
Note: None is the factory default setting.
Determines whether the scanner uses the DSR Signal
Notes:
• Off is the factory default setting.
•
DSR is a handshaking signal used by most serial cables. The serial port uses
DSR to distinguish data sent by the computer from data created by electrical
noise in the serial cable. The electrical noise can cause stray characters to
print. Set this to On to prevent stray characters from printing.
Description
Specifies SMTP server gateway and port information
Note: 25 is the default SMTP gateway port.
Specifies the amount of time in seconds before the server stops trying to
send an e‑mail
Note: 30 seconds is the factory default setting.
Specifies a reply address of up to 128 characters in the e-mail sent by the
printer
154