Copying
•
Make sure to set the copy size to 100%.
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, navigate to:
Copy > Advanced Options > Paper Saver > select the output you want >
Note: If Paper Saver is set to Off, then the Print Page Borders option is unavailable.
Creating a custom copy job
The custom copy job is used to combine one or more sets of original documents into a single copy job.
The definition of a set depends on the scan source:
•
If you scan a document on the scanner glass, then a set consists of one page.
•
If you scan multiple pages using the ADF, then a set consists of all scanned pages until the ADF tray becomes empty.
•
If you scan one page using the ADF, then a set consists of one page.
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, navigate to:
Copy > Advanced Options > Custom Job > On >
Note: When the end of a set is reached, the scan screen appears.
3
Load the next document into the ADF tray or on the scanner glass, and then touch Scan from automatic feeder or
Scan from flatbed.
Note: Change the scan job settings, if necessary.
4
If you have another document to scan, then repeat the previous step. Otherwise, touch Finish the job.
Placing a header or footer on pages
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, navigate to:
Copy > Advanced Options > Header/Footer > select where you want to place the header or footer > select the type
of header or footer you want
3
Enter the required information depending on the header or footer you selected, and then touch Done.
4
Touch
, and then press
Canceling a copy job while pages are being printed
1
From the printer control panel, touch Cancel Job or press
2
Touch the job you want to cancel, and then touch Delete Selected Jobs.
Note: If you press
on the keypad, then touch Resume to return to the home screen.
> Copy It
.
> Copy It
on the keypad.
96