Lexmark 6500e User Manual page 178

Understanding the printer menus
Use
ADF Skew Fix
Off
On
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
‑4 to 4
Enable Color Fax Scans
Off by default
On by default
Never use
Always use
Auto Convert Color Faxes to Mono
Faxes
On
Off
Fax Receive Settings
Use
Enable Fax Receive
On
Off
Enable Caller ID
On
Off
Fax Job Waiting
None
Toner
Toner and Supplies
Rings to Answer
1–25
Auto Reduction
On
Off
Paper Source
Auto
Tray [x]
Multi‑Purpose Feeder
To
Correct the slight skew in the scanned image.
Note: Off is the factory default setting.
Specify if the original document is scanned edge-to‑edge before faxing.
Note: Off is the factory default setting.
Adjust the sharpness of a fax.
Note: 3 is the factory default setting.
Specify warm or cool outputs. Cool values generate a bluer output than the default
while warm values generate a redder output than the default.
Enable color faxing.
Note: Off by default is the factory default setting.
Convert all outgoing faxes to black and white.
Note: On is the factory default setting.
To
Allow the printer to receive fax jobs.
Note: On is the factory default setting.
Display the number sending the incoming fax job.
Note: On is the default factory setting.
Remove fax jobs from the print queue when the job requires specific unavailable
resources.
Note: None is the factory default setting.
Specify the number of rings before answering an incoming fax job.
Note: 3 is the factory default setting.
Scale an incoming fax job so that it fits the size of the paper loaded in the designated
fax source.
Note: On is the factory default setting.
Specify the paper source for printing incoming fax jobs.
Note: Auto is the factory default setting.
178