Standard Usb Menu - Lexmark 6500e User Manual

Understanding the printer menus
Menu item
Activate
Yes
No
View Name
View Address
Set Zone
[default]
[list of zones available on the network]

Standard USB menu

Menu item
PCL SmartSwitch
On
Off
PS SmartSwitch
On
Off
NPA Mode
Auto
On
Off
Description
Activates AppleTalk support
Note: Yes is the factory default setting.
Shows the assigned AppleTalk name
Note: The name can be changed only from the Embedded Web Server.
Shows the assigned AppleTalk address
Note: The address can be changed only from the Embedded Web Server.
Provides a list of AppleTalk zones available on the network
Note: When "default" is selected, the printer uses the AppleTalk zone that the
router identifies as the default zone for the network. If no default zone exists,
then the zone marked with an * is the default setting.
Description
Sets the scanner to automatically switch to PCL emulation when a print job received
through a USB port requires it, regardless of the default printer language
Notes:
•
On is the factory default setting.
•
When set to Off, the scanner does not examine incoming data. The scanner
uses PostScript emulation if the PS SmartSwitch is set to On. It uses the default
printer language specified in the Setup menu if the PS SmartSwitch is set to
Off.
Sets the scanner to automatically switch to PS emulation when a print job received
through a USB port requires it, regardless of the default language
Notes:
•
On is the factory default setting.
•
When set to Off, the scanner does not examine incoming data. The scanner
uses PCL emulation if the PCL SmartSwitch is set to On. It uses the default
printer language specified in the Setup menu if the PCL SmartSwitch is set to
Off.
Sets the scanner to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol
Notes:
• Auto is the factory default setting. Auto sets the scanner to examine data,
determine the format, and then process it appropriately.
•
Changing this setting from the scanner control panel and then exiting the
menus causes the scanner to restart. The menu selection is then updated.
148