Fax Settings Menu - Lexmark MX810 Series User Manual

Understanding the printer menus

Fax Settings menu

Fax Mode (Analog Fax Setup) menu
Analog Fax Setup mode sends the fax job through a telephone line.
General Fax Settings
Use
Restore Factory Defaults
Optimize Fax Compatibility
Fax Name
Fax Number
Fax ID
Fax Name
Fax Number
Enable Manual Fax
On
Off
Memory Use
All receive
Mostly receive
Equal
Mostly send
All send
Cancel Faxes
Allow
Don't Allow
Caller ID
Off
Primary
Alternate
Fax number masking
Off
From left
From right
Digits to Mask
0–58
To
Restore the factory defaults of all fax settings.
Optimize fax compatibility with other fax machines.
Specify the name of the fax in the printer.
Specify the number assigned to the fax.
Specify how the fax is identified.
Note: Fax Number is the factory default setting.
Set the printer to fax manually, which requires a line splitter and a telephone handset.
Notes:
•
Off is the factory default setting.
• Use a regular telephone to answer an incoming fax job and to dial a fax
number.
• Press # 0 on the numeric keypad to go directly to this setting.
Define the allocation of non-volatile memory between sending and receiving fax jobs.
Note: Equal is the factory default setting.
Specify whether canceling of fax jobs is allowed.
Note: Allow is the factory default setting.
Specify the type of caller ID being used.
Specify the direction from where digits are masked in an outgoing fax number.
Notes:
•
Off is the factory default setting.
•
The number of characters masked is determined by the "Digits to mask"
setting.
Specify the number of digits to mask in an outgoing fax number.
Note: 0 is the factory default setting.
198