Water Pump Removal And Inspection - Rotax 912 Series Maintenance Manual

3.1)

Water pump removal and inspection

See Fig. 75-2.
The water pump is integrated in the ignition housing. For repair work, fly wheel
hub (1) and the ignition housing (2) must be removed. On some engine
installations this requires removal or partial lifting of engine after loosening the
engine suspension.
To remove the hex. screw (3) M16x1.,5 from the fly wheel hub, the crankshaft
must be locked. See the corresponding Maintenance Manual (Line Mainte-
nance) for the respective engine type, 912 Series or 914 Series.
Fig. 75-2
3
Effectivity 912/914 Series
Edition 1 / Rev. 0
BRP-Rotax
Maintenance Manual
00344
1
2
75-00-00
page 6
May 01/2007