Rotax 912 Series Maintenance Manual page 155

Fig. 72-101
Zylinder 1 und 3 /
Cylinder 1 and 3
00305
Fig. 72-102
00306
Effectivity 912/914 Series
Edition 1 / Rev. 0
BRP-Rotax
Maintenance Manual
auf den Propellerflansch gesehen /
looking at propeller flange
2
Oil the entire length of the piston pin (4). The connecting rod eye (5) and
the piston pin bore (6) are also oiled. Insert piston pin with guide punch,
part no. 877802 (slide fit).
If this is not possible, the piston pin can be pulled in with the piston pin
tool (7), part no. 877091. Insert piston pin into one side of the piston
bore, insert spindle of installation tool (8) and fit nut (9). Turning the
spindle clockwise draws the piston pin in completely, up to the retaining
groove (10).
8
7
10
6
Zylinder 2 und 4 /
Cylinder 2 and 4
3
4
5
72-00-00
page 87
May 01/2007
9