Exhaust manifold:
◆ NOTE:
The exhaust manifold (22) is directly attached to the turbine housing by means
of allen screws (23) M8x25 and nuts (24) and to the holder (26) by means of allen
screw M8x50 (25).
Exhaust bracket:
◆ NOTE:
Remove allen screw (27) M10x50 along with the lock washer and washer.
Also, detach connection (28) of exhaust bracket with engine suspension frame
(not supplied with the engine).
Remove distance sleeve (29) 10.5/17/15 from the arm of the engine suspension
frame.
Effectivity 912/914 Series
Edition 1 / Rev. 0
BRP-Rotax
Maintenance Manual
There is no need to disassemble the complete unit of muffler -
turbocharger - exhaust manifold for the removal of the muffler
bracket.
There is no need to disassemble the complete unit of exhaust
- turbocharger - exhaust manifold for the removal of the muffler
bracket.
Fig. 78-2
4
11
5
00160
78-00-00
page 9
May 01/2007