2) Rocker Arm With Pressed Sinter Bushing; 3) Rocker Arm Shaft - Rotax 912 Series Maintenance Manual

Effectivity 912/914 Series
Edition 1 / Rev. 0
BRP-Rotax
Maintenance Manual

3.11.8.2) Rocker arm with pressed sinter bushing

See Fig. 72-81.
See 72-00-00 sec. 4.
The bearing bush cannot be replaced. If the rocker arm is
worn, it must be replaced with a rocker arm with a plastic
bushing.
◆ NOTE:
Fig. 72-81

3.11.8.3) Rocker arm shaft

See Fig. 72-82.
See 72-00-00 sec. 4.
Check the surface of the rocker arm for signs of friction.
◆ NOTE:
When doing so, check whether an oversize
rocker arm shaft is fitted.
07497
VT07
Oversize rocker arm shafts and rocker arm
bushings are available for repairing the
rocker arm bearing in the cylinder head.
Fig. 72-82
07496
72-00-00
page 72
May 01/2007