Msp - Stockpicker Platform - Installation - JLG 15MVL Series Service Maintenance Manual

5.8 MSP - STOCKPICKER PLATFORM - INSTALLATION

1
1. Mast Platform Header Section
2. Nut
Note: (a) Once mounted, adjust bumper rests on both sides evenly so the platform rests on the bumpers when in stowed position.
3121231
5
4
3
2
Figure 5-8. MSP - StockPicker Platform Installation.
3. Washers
4. Hex Head Screws (2 inch)
– JLG Lift –
SECTION 5 - MAST COMPONENTS
6
5. Hex Head Screws (2-1/2 inch)
6. Platform Bumper Rest (a)
5-27