Inspection And Maintenance Codes; Footnotes - JLG 15MVL Series Service Maintenance Manual

SECTION 2 - GENERAL
Table 2-2. MVL/MSP - Preventive Maintenance & Inspection Schedule. (Continued)
AREA ON MACHINE
Hydraulic Fluid ***
Electrical Connections
Instruments, Gauges, Switches, Lights, Horn
GENERAL
Operator and Safety Manual in Storage Box
ANSI and EMI Manuals/Handbooks Installed
Capacity Decals Installed, Secure, Legible
All Decals/Placards Installed, Secure, Legible
"Walk-Around" Inspection Performed
Annual Machine Inspection Due
No Unauthorized Modifications or Additions
All Relevant Safety Publications Incorporated
General Structural Condition and Welds
All Fasteners, Pins, Shields, and Covers
Grease and Lubricate to Specifications
Function Test of All Systems
Paint and Appearance
Notify JLG of Change in Machine Ownership
* Change only when serviced, requires 10 oz. (296cc's) to fill.
** Replace after system brush wear indicator warning is activated on Ground Control Station.
*** Drain and refill with fresh hydraulic fluid every two years.

Inspection and Maintenance Codes:

1. Check for proper and secure installation.
2. Visual inspection for damage, cracks, distortion, or
excessive wear.
3. Check for proper adjustment.
4. Check for cracked or broken welds.
5. Operates properly.
6. Returns to neutral or "off" position when released.
7. Clean and free of debris.
8. Interlocks function properly.
9. Check for signs of leakage.
10. Decals installed and legible.
11. Check for proper fluid level.
12. Check for chafing and proper routing.
13. Check for proper tolerances.
14. Properly lubricated.
15. Torqued to proper specification.
2-4
3 MONTH
PRE-START (a)
PREVENTATIVE
INSPECTION
MAINTENANCE
11
5
21
21
21
21
22
22
16. No gouges, excessive wear, or cords showing.
17. Properly inflated and seated around rim.
18. Proper and authorized components.
19. Fully charged.
20. No loose connections, corrosion, or abrasions.
21. Verify.
22. Perform.
23. Sealed properly.
24. Overrides Platform controls.
25. Inspected per Service and Maintenance Manual.

Footnotes:

(a) Prior to use each day; or at each Operator change
(b) Prior to each sale, lease, or delivery
(c) In service for 3 months; or Out of service for 3 months
(d) Annually, no later than 13 months from the date of the
– JLG Lift –
INTERVAL
6 MONTH PRE-DELIVERY (b)
PREVENTATIVE OR FREQUENT (c)
MAINTENANCE INSPECTION
or more; or Purchased used
prior annual inspection
ANNUAL (d)
(YEARLY)
INSPECTION
11 11
20 20
21 21
21 21
21 21
21 21
21
21 21
21 21, 22
2, 4 2, 4
1, 2
22 22
22
7 7
22
3121231