JLG 15MVL Series Service Maintenance Manual page 19

ITEM COMPONENT
1 Fill To Line on
Hydraulic Oil Reservoir
5 Qt. Reservoir
2 - Per Section
2
Mast Chains
Key to Lubricants: MPG - Multipurpose Grease
HO - Hydraulic Oil - ISO-Vg grade 32, 46.
GEAR OIL - Good Quality Worm Gear Oil - SAE 90 - AGMA#5 - EP Compounded
CL - Chain Lube. Use a good quality chain lubricant
Notes: (a) Be certain to lubricate like items on each side of the machine.
(b) Recommended lubricating intervals are based on normal use. If machine is subjected to severe operating conditions,
such as a high number of cycles, location, corrosive/dirty environment, etc., user must adjust lubricating requirements accordingly.
(c) Prior to checking hydraulic oil level, operate machine through one complete cycle of lift function (full up and down). Failure to do so
will result in incorrect oil level reading on the hydraulic reservoir.
3121231
Table 1-7.Lubrication Intervals for Various Components
NO/TYPE (a)
LUBE/METHOD
LUBE POINTS
HO - Check Hyd. Oil
Level
HO - Change Hyd. Oil
Chain Lube - Brush or
Spray
SECTION 1 - MACHINE SPECIFICATIONS
INTERVAL (b)
3 6 1
MONTHS MONTHS YEAR
✔
– JLG Lift –
COMMENTS
2
YEARS
Check fluid level every day. (c)
✔
Change hydraulic oil every 2
years.
Inspect, lubricate if dry or rusting.
1-5