JLG 15MVL Series Service Maintenance Manual page 72

SECTION 4 - CONTROL COMPONENTS
Table 4-1. MVL/MSP Ground Control Module - Field Programmable Settings and Factory Preset.
Level-2: Service Level Settings
Level-3: Operator Level Settings
LEVEL
2 Ancillary 1 Anti-Tie-down
2 Ancillary 2 Anti-Tie-down
2 Mode Select Delay (active before time-out)
2 Invert Lift Direction
2 Lift Lock Delay
2 Acceleration (platform lowered)
2 Deceleration (platform lowered)
2 Turn Acceleration (platform lowered)
2 Turn Deceleration (platform lowered)
2 Maximum Forward Speed (platform lowered)
2 Minimum Forward Speed (platform lowered)
2 Maximum Reverse Speed (platform lowered)
2 Minimum Reverse Speed (platform lowered)
2 Maximum Turn Speed (platform lowered)
2 Minimum Turn Speed (platform lowered)
2 Minimum Forward Speed (platform elevated)
2 Minimum Reverse Speed (platform elevated)
2 Minimum Turn Speed (platform elevated)
2 Motor Compensation
2 EPPROM Reset
Notes: (a) MSP Models equipped with stock-picker platform and mid-gate interlock (drive inhibit) switch are factory preset to HIGH.
(b) MSP Models equipped with 12 ft. or 14 ft. lift-limit-switch option are factory preset to HIGH.
4-16
PROGRAMMABLE ITEM
On LCD Display:
FACTORY PRESET
0
0
5 Sec.
NO
5 Sec.
80
80
50
50
100
40
50
20
20
15
13
13
5
50 mOhms
—
– JLG Lift –
✓
YES = HIGH =
✕
NO = LOW =
SETTING RANGE
0-1
0-1
0 - 60 Seconds
YES/NO
0 - 60 Seconds
1 - 100
1 - 100
1 - 100
1 - 100
1 - 100
1 - 100
1 - 100
1 - 100
1 - 100
1 - 100
1 - 100
1 - 100
1 - 100
0 - 500 mOhms
Resets GCM to default factory settings
↑
↓
3121231