(2) Removing the "Case U"
1. Remove the "Case U" Block. Refer to the above
2. Remove the "Cover Front" upwardly.
3. Remove the 1 screw (PHT (PT2T), M3x14) and detach the "Cover Connector".
4. Remove the 1 screw (PH, M5x15 (NI)) and 1 nut ((#3), M5 (NI)), and detach the "Damper
Cover".
5. Remove labels ("Label Rating" and "Label Caution") from the "Case U".
PHT (PT2T), M3x14
Cover Connector
Cover Front
Note on reassembling
• When assembling the "Damper Cover", tighten the screw while pushing down the "Damper
Cover".
"(1) Removing the "Case U"
PH, M5x15 (NI)
Damper Cover
(#3), M5 (NI)
Label Caution
3-17
Disassembly, Reassembly and Lubrication
Block"
Label Rating
Case U
CL-S6621