Citizen CL-S6621 Technical Manual page 69

Submenu Name
PowerOn Head
Check
Ribbon End
Detection
Parallel Error Out
USB Serial
Number
Auto Exec Print
Config Print
Layout
Print Preference
Note: "Through Sensor Position" adjustment and "Reflect Sensor Position" adjustment must
be done after one of the following parts is replaced.
• SA, Main PCB
• SA, Ribbon Sensor (on both front and rear sides)
Adjustable Value
(Default Value)
ON, OFF
(ON)
Quick, Normal,
Slow (Quick)
ON, OFF
(ON)
ON, OFF
(OFF)
ON, OFF
(ON)
Standard, Reversed
(Standard)
Darkness, Speed
(Darkness)
Description
To perform the head check at power ON or not is
selectable.
Sets the ribbon end detection time.
To set the Fault signal to ON or not at the time of
error occurrence in parallel interface is selectable.
To send the serial number to the host when the
USB interface is connected to the printer or not is
selectable.
To execute the Auto Exec file stored in the printer
at power ON or not is selectable.
Print layout type can be selected.
Standard: Prints setting items on the left and set
values on the right.
Reversed: Prints set values on the left and setting
items on the right.
To put the priority on printing density or printing
speed is selectable.
2-55
Operation Panel
CL-S6621