Front Side - Citizen CL-S6621 Technical Manual

Thermal transfer barcode & label printer
Hide thumbs Also See for CL-S6621:
Table of Contents

Advertisement

3-6-9. "SA, Ribbon Tension Shaft F" and "SA, Ribbon Sensor" on the

front side

1. Open the "Cover Top" Block and remove the "Unit, Ribbon". Refer to
2. Remove the ribbon covers. Refer to
3. Remove the "Unit, Ribbon Sensor F". Refer to
Ribbon
Frame"".
4. Release the "Bush Ribbon Roller" (2 pcs.) () at both ends. First, lift its end with the blade of a
flat-blade screwdriver or the like ("a") and then turn it by approx. 90 degrees ("b"). (See the
magnified view.) Next, remove the "SA, Ribbon Tension Shaft F" Block, and then the "Bush
Ribbon Roller" (2 pcs.).
5. Peel off the "Sheet Static Eliminator 6621" from the "SA, Ribbon Tension Shaft F" Block.
6. Remove the 2 screws (No.0, TFH (PT4-0.5), M2.), and detach the "Interrupter Ribbon Sensor"
and "Holder Tension Spring 1" from the "SA, Ribbon Tension Shaft F" ().
7. Remove the 1 screw (PH (PW), M2x8) (), and detach the "Lever Tension Adjust F" Block and
"Shaft Tension Adjust".
8. Remove the 2 Screws (No.0, TFH (PT4-0.5), M2) (), and detach the "Knob, Tension Adjust"
from the "Lever Tension Adjust F".
9. Remove the 1 screw (No.0, TFH (PT4-0.5), M2), and detach the "Holder Tension Spring 2" and
"Spring Ribbon Tension" (2 pcs.) from the "Lever Tension Adjust F".
10. Remove the 2 screws (No.0PH (4-0.3)M2x3 (NI)) (), and detach the "SA, Ribbon Sensor"
from the "Plate Ribbon Tension Sensor".
Sheet Static Eliminator 6621
No.0, TFH (PT4-0.5), M2.
Lever Tension Adjust F
Shaft Tension Adjust
Bush Ribbon Roller
No.0PH (4-0.3)M2x3 (NI)
SA, Ribbon Sensor
FLOIL G-311S
Note on reassembling:
Apply FLOIL G-311S to the slits (4 places) shown by the
"3-6-4(1) Removing the ribbon
SA, Ribbon Tension Shaft F
PH (PW), M2x8
J104
Plate Ribbon Tension Sensor
"3-6-8 "Unit, Ribbon Sensor F/R" and "SA
Holder Tension Spring 2
Interrupter Ribbon
Sensor
Spring Ribbon Tension
Holder Tension Spring 1
No.0, TFH (PT4-0.5), M2
No.0, TFH (PT4-0.5), M2
3-25
Disassembly, Reassembly and Lubrication
"3-6-2 Unit,
covers".
Knob, Tension, Adjust
b
a
Bush Ribbon Roller
marks.
Ribbon".
CL-S6621

Advertisement

Chapters

Table of Contents
loading

Table of Contents