3-6-14. SA2 Platen
1. Remove the "Unit, Mechanism". Refer to
2. Open the "SA, Head" Block.
3. While pressing the part "A" of the "SA2 Platen", lift the right end of the "SA2 Platen" a little.
(See the arrow "a".)
Next, move it to the right and then remove it from the printer by lifting it upwardly. (See the
arrow "b".)
Note on reassembling:
• After reassembling the "SA2 Platen", be sure that it is securely engaged with the main body.
"3-6-13(1) Unit,
"SA, Head" block
SA2 Platen
a
b
3-35
Disassembly, Reassembly and Lubrication
Mechanism".
A
CL-S6621