Table of Contents
Advertisement
General Specifications
Outline of electronic devices
CPU
ROM
RAM
Media detection sensors
Transparent sensor
Reflective sensor
PNE (Paper Near
End) sensor
Label peeling sensor *
Communication interfaces
Serial
USB
Communication interface (Options)
8
Parallel*
Network
Indications and switches
LED
Buzzer
Operating panel keys
Head-up detection
switch
Power switch
Power supply
120V version
220V version
Power consumption (max. value)
120V version
220V version
*8: This interface is Non-L. P. S. (Limited Power Source).
*9: Standby mode is default OFF.
CL-S6621
32-bit RISC CPU
Standard equipment: FLASH ROM 16MByte (User area: 4MByte)
Standard equipment: SDRAM 32MByte (User area: 4MByte)
Detects media gap between labels, notches on tags, and media out
Detects reflective mark on back of media and media out
Detects the near end state of roll paper
(By default, issuing a paper near end alarm is disabled by the menu
settings.)
1
Detects labels that are peeled off.
2400, 4800, 9600, 19200, 38400, 57600, or 115200 bps
High-speed USB2.0 (480Mbps)
IEEE1284 (Compatible, Nibble, ECP mode)
Wired LAN:
Ethernet interface (10-Base-T/100-Base-TX)
Wireless LAN:
IEEE802.11n/IEEE802.11g/IEEE802.11b
POWER, PRINT, CONDITION, ERROR
Alarms, errors, etc.
PAUSE, FEED, STOP, MODE/REPEAT
Detects head open.
Turns power on and off.
120V (-10%+6%), 2.5A, 60Hz (U.S.A., Canada)
UL60950-1st/2nd Edition, CSA No. 950, FCC Part 15 Subpart B
(Class A)
220V-240V (-10%+6%), 1.5A, 50/60Hz (Europe)
EN60950-1, EN55022 (Class A), EN55024, EN61000-3-2,
EN61000-3-3, CCC GB4943-2001/GB9254-1998/GB17625.1-2003
105W (operation at 6 IPS at 12.5% printing duty)
4.4W (printer standby in Normal mode)
2.3W (printer standby in Standby mode*
105W (operating at 6 IPS at 12.5% printing duty)
5.0W (printer standby in Normal mode)
2.8W (printer standby in Standby mode*
9
9
1-6
)
)
Advertisement
Chapters
Table of Contents
