Citizen CL-S6621 Technical Manual page 66

Operation Panel
Mach Cut Pos
Save=(PAUSE) Next Digit=(FEED) Change value=(STOP) Exit=(MODE)
Mach Peel Pos
Save=(PAUSE) Next Digit=(FEED) Change value=(STOP) Exit=(MODE)
Mach Hor Pos
Save=(PAUSE) Next Digit=(FEED) Change value=(STOP) Exit=(MODE)
AutoCal Mode
Save=(PAUSE) Change value=(STOP)
SeeThrough Sensor
Save=(PAUSE) Next Digit=(FEED) Change value=(STOP) Exit=(MODE)
Reflect Sensor
Save=(PAUSE) Next Digit=(FEED) Change value=(STOP) Exit=(MODE)
SeeThrough Sensitivity
Save=(PAUSE) Change value=(STOP)
Reflect Sensitivity
Save=(PAUSE) Change value=(STOP)
Darkness Rate
Save=(PAUSE) Change value=(STOP)
Double Heat Menu
Save=(PAUSE) Change value=(STOP)
PowerOn Head Check
Save=(PAUSE) Change value=(STOP)
Ribbon End Detection
Save=(PAUSE) Change value=(STOP)
Parallel Error Output
Save=(PAUSE) Change value=(STOP)
USB Serial Number
Save=(PAUSE) Change value=(STOP)
Auto Exec Print
Save=(PAUSE) Change value=(STOP)
Config Print Layout
Save=(PAUSE) Change value=(STOP)
Print Preference
Save=(PAUSE) Change value=(STOP)
Note: In the actual printing, the cursor "^" will be printed instead of " (underline)".
CL-S6621
+000dots
+000dots
+00dots
ON
Exit=(MODE)
0.0
0.0
Low
Exit=(MODE)
Low
Exit=(MODE)
High
Exit=(MODE)
OFF
Exit=(MODE)
ON
Exit=(MODE)
Quick
Exit=(MODE)
ON
Exit=(MODE)
OFF
Exit=(MODE)
ON
Exit=(MODE)
Standard
Exit=(MODE)
Darkness
Exit=(MODE)
2-52