Citizen CL-S6621 Technical Manual page 71

(b) Service Mode menu table
Submenu Name
Head Check
ROM Check
RAM Check
Print Counter
Service Counter
Cut Counter
Value
None [PAUSE]: Checks the number of defective
thermal elements and prints it. If no defective
thermal element is found, "0" will be printed.
Example: Bad head element:
[STOP]: Nothing is printed.
None [PAUSE]: Performs ROM checksum test, and
prints the check result (OK or NG) and the
checksum value.
Example: PROGRM ROM OK 4F4E
[STOP]: Nothing is printed.
None [PAUSE]: Performs RAM capacity check and
prints the check result.
Example: RAM OK 32768K
[STOP]: Nothing is printed.
None [PAUSE]: Prints the total printed length
accumulated from when the printer is firstly
used.
Example: Length 1234.5Km
[STOP]: Nothing is printed.
None [PAUSE]: Prints the service counter length in
Km accumulated from when it was reset last
time.
Example: Length 0123.4Km
[STOP]: Nothing is printed.
None [PAUSE]: Prints the cut counter value
accumulated from when it was reset last time.
Example: Count 10
[STOP]: Nothing is printed.
2-57
Description
Clear Service Counter ?
Yes=(PAUSE) No=(STOP)
To clear the service counter, press the
[PAUSE] key again. To quit, press the
[STOP] key.
Clear Cut Counter ?
Yes=(PAUSE) No=(STOP)
To clear the cut counter, press the
[PAUSE] key again. To quit, press the
[STOP] key.
Operation Panel
0 dot(s)
CL-S6621