Citizen CL-S6621 Technical Manual page 65

[Procedure to enter Factory/Service Mode]
1. Set media.
2. While pressing and holding all keys, turn on the power. (ALL keys + [POWER])
The printer enters Factory/Service mode. The PRINT LED and CONDITION LED light up
and the following message is printed on media.
Citizen CL-S6621 VuePrint Menu System
The four control panel buttons are used to select different options. Generally:
Yes / Select / Save
No / Next Item / Increase Item
Next Digit
Exit to previous menu
Do you want to reset this printer to factory settings?
3. Press the [STOP] key to skip to the next message.
Then, the following message is printed.
Do you want to print the current menu settings?
4. Press the [STOP] key to skip to the next message.
Then, the following message is printed.
Do you want to change the menu settings?
5. Press the [PAUSE] key to enter the menu settings mode.
Then, the following top menu is printed.
Do you want to change "Factory Mode Menu" items?
Yes=(PAUSE) No=(STOP) Exit=(MODE)
• To enter the Factory Mode menu, proceed to the next step 6.
• To proceed to the next top menu (Service Mode menu), press the [STOP] key. See step
7.
• To return to the previous one, press the [MODE] key.
6. Press the [PAUSE] key to enter the submenus.
* The following submenus under the Factory Mode menu will be printed as you press the
[PAUSE] key repeatedly.
* For setting each item, see
menu table", and setting example "How to change the value in the Factory Mode menu"
on page 2-56.
Through Sensor Position
Save=(PAUSE) Next Digit=(FEED) Change value=(STOP) Exit=(MODE)
Reflect Sensor Position
Save=(PAUSE) Next Digit=(FEED) Change value=(STOP) Exit=(MODE)
Mach Tear Pos
Save=(PAUSE) Next Digit=(FEED) Change value=(STOP) Exit=(MODE)
(to be continued)
= PAUSE (P) key
= STOP (S) key
= FEED (F) key
= MODE (M) key
"(3-3) Factory/Service Mode menu table
+000dots
+000dots
+000dots
2-51
Yes=(PAUSE) No=(STOP)
Yes=(PAUSE) No=(STOP)
Yes=(PAUSE) No=(STOP)
- (a) Factory Mode
Operation Panel
CL-S6621