3-5.
Quick Detachment of Major Parts
How to quickly detach the following major parts separately is explained here.
• SA, Head
• SA2 Platen
3-5-1. SA, Head
• When detaching or reinstalling the "SA, Head", be careful not to damage the thermal
elements. Especially, avoid contacting the thermal elements with a metal part, etc.
Do not touch the thermal elements of the "SA, Head" with your bare hand.
1. Open the "Cover Top" Block.
2. Push the "Lever Head Lock" () and open the Ribbon & Head Block ().
3. Remove the 2 screws (NO.1, TFH (6-0.7), M3.0x6 (NI)) () and detach the "SA, Head" ().
4. Disconnect the 2 connectors ( and ) from the "SA, Head".
NOTE: To disconnect the connector (), unlock the connector lock.
SA, Head
Notes on reassembling:
• The Ribbon & Head Block has two bosses that allow easy positioning of the "SA, Head". When
assembling the "SA, Head", be sure that it is securely engaged with the Ribbon & Head Block.
• Insert the connectors firmly.
Ribbon & Head Block
Caution
"Cover Top" Block
Lever Head Lock
3-7
Quick Detachment of Major Parts
NO.1, TFH (6-0.7),
M3.0x6 (NI)
CL-S6621