Table of Contents
Advertisement
Adjustments
Key operation on the printer:
(Next item / Increase item)
(2-2) Adjustment procedures
• DO NOT adjust for other menus not explained here. They are for factory setup
use and changing them will cause the printer to be defective.
• Do not turn OFF the power of the printer until you finish the adjustment.
• The value adjusted here is retained until you change it with the same
1. Turn on the PC and run the Terminal software.
2. While pressing and holding the [MODE], [FEED] and [STOP] key, turn on the power.
([MODE] + [FEED] + [STOP] + [POWER])
3. The following initial maintenance screen will appear on the PC.
[Transparent sensor sensitivity adjustment, Media: Label paper]
4. Press the [FEED] key to select the transparent sensor menu ("Ini Thru Sensor").
CL-S6621
PAUSE
UP
SELECT
EXIT
If it is turned OFF, you need to repeat the adjustment from the beginning.
procedure. Even if you perform initialization in the "user menu setup
mode", it is not initialized.
FEED
STOP
MODE/REPEAT
Caution
3-56
DOWN
(Previous item / Decrease item)
Advertisement
Chapters
Table of Contents
