3-6-19. SA PF Motor
1. Remove the "Unit, Mechanism". Refer to
2. Cut the "Wire Tie". Then remove 2 screws (BH, M3x4 (NI)) and detach the "SA PF Motor"
Block.
3. Disconnect the "SA, PF Motor Cable" from the "SA PF Motor".
BH, M3x4 (NI)
3-6-20. "Carriage Adjust Sensor L", "SA, Head Up Switch" and "SA Ref
Sen PCB"
(1) "Carriage Adjust Sensor L" and "SA, Head Up Switch"
1. Remove the "Unit, Mechanism". Refer to
2. Remove the "Unit, Sensor U". Refer to
3. Remove the "Unit, Head". Refer to
4. Remove the "SA, PF Motor". "Refer to
5. Turn over the PF Block.
6. Cut the "Wire Tie" (2 pcs.) and unhook the wires from the 2 hooks.
SA PF Motor
"3-6-17 Unit,
"PF" Block
Hook
Carriage Adjust Sensor L
Wire Tie
[Bottom View]
Disassembly, Reassembly and Lubrication
"3-6-13(1) Unit,
Mechanism".
J6
J7
Wire Tie
SA, PF Motor Cable
"3-6-13(1) Unit,
Mechanism".
"3-6-15 Unit, Sensor
Head".
"3-6-19 SA PF
Motor".
Wire Tie
Hook
SA, Head Up Switch
3-47
U".
CL-S6621