Table of Contents
Advertisement
Adjustable Sensors
1-4.
Adjustable Sensors
There are two media sensors; the upper sensor (transparent sensor) and the bottom sensor
(reflective sensor). The upper sensor is used to detect the labels on the liner or the U-shaped
notches of tag. The bottom sensor is used to detect the black marks on tag. Also, both sensors are
used to detect media end.
The mechanical adjustable range of both sensors is equal and they are adjusted at the same time
by turning the blue knob ("Gear Bevel Lead Screw U").
For details about the media sensors, refer to
Media guide
2.5 mm
(0.10")
CL-S6621
4.8 to 88.9 mm
(0.19 to 3.5")
(Moveable range of the
transparent sensor)
2.7 to 86.8 mm
(0.11 to 3.42")
(Moveable range of the
reflective sensor)
168 mm (6.61")
Maximum media width: 178 mm (7.01")
"2-1-3 Label/Tag Detection
Center
Printable area
Direction of media feed
1-10
Mechanism".
Media
7.5 mm
(0.30")
Advertisement
Chapters
Table of Contents
