Cam Head Balance - Citizen CL-S6621 Technical Manual

Notes on reassembling:
• After assembling the "SA, Head", clean the surface of the thermal elements with the head
cleaner.
• After assembling the "SA, Head", perform a test printing in self print mode to check the print
quality. (Refer to
slanting or ribbon wrinkle may occur. In this case, perform
Adjustment".

(2) Cam Head Balance

1. Place the Head Frame Block upside down and set the blue dials as follows for easier
disassembly.
Media width adjustment dial:
Media thickness adjustment dial: Location "5"
"2-3-2-(2-1) Self print
Location "5"
Disassembly, Reassembly and Lubrication
mode".) If the print quality is not enough, ribbon
"3-7-2 Ribbon Slant Elimination
"5"
Cam Head Balance
(Media width adjustment dial)
"5"
Cam Head Adjust
(Media thickness adjustment dial)
3-43
CL-S6621