Table of Contents
Advertisement
Operation Panel
H ow to perform the check in the Service Mode menu
1
For example, the following shows how to perform the head check.
1. Perform steps 1-7 on pages
to enter the Factory/Service
2. Press the [PAUSE] key until "Head Check" submenu is printed.
Do you want to change "Service Mode Menu" items?
Yes=(PAUSE) No=(STOP) Exit=(MODE)
Head Check
Yes=(PAUSE) No=(STOP) Exit=(MODE)
3. Press the [PAUSE] key to check for head abnormality.
The number of faulty thermal elements is printed.
Example:
After printing the check result, the next submenu is automatically printed.
If you press the [STOP] key, nothing is printed.
CL-S6621
2-51
to
2-53
Mode".
Exec
Bad head element:
2-58
to enter the Service Mode menu. See
0 dot(s)
"(3-2) How
Advertisement
Chapters
Table of Contents
