Phase-Adjustment Memory; Using The Plasma Display Main Body And The Remote Control Together With The Personal Control - Pioneer PDP-V401 Technical Manual

5.1.3 Phase-adjustment memory

This machine contains the following 10 memory areas.
Of these, note that only 8 are adjustable, since the FACTORY area is read-only.
RGB1(BNC terminal input)
RGB2(Mini D-SUB terminal input)
NOTE) is for PDP-V401E only
• VGA mode
640 dots × 480 lines/horizontal-scanning frequency 31.47 kHz/vertical-scanning frequency 59.94 Hz
• PC9800 ® normal mode
640 dots × 400 lines/horizontal-scanning frequency 24.83 kHz/vertical-scanning frequency 56.42 Hz, horizontal-scanning
frequency 31.5 kHz/vertical-scanning frequency 70.1 Hz
• Macintosh ® 13-inch mode
640 dots × 480 lines/horizontal-scanning frequency 35.00 kHz/vertical-scanning frequency 66.67 Hz
Phase adjustment data are of the following 4 types:
CLQ.FRQ., CLK.PHS., HOR.POS., VER.POS.
This data cannot be adjusted when VIDEO and Y/C are input.
These settings are automatically selected according to input function and input signal.
Note: When no signal or no applicable signal is input, the memory area for NTSC is selected automatically.

5.1.4 Using the plasma display main body and the remote control together with the personal control

The operation panel of the plasma display main body may not be used with the remote control and the PC.
Later commands for the operation panel of the plasma display main body, remote control, and PC take precedence over
earlier commands.
Example:
Operation
Remote control MENU button
PC <AJY> command
Main body operation panel INPUT
button
Moves to Menu mode
Only the following PC commands are accepted:
'
Releases Menu mode and switches to RS232C adjustment
mode.
Only the following remote control buttons are accepted:
'
Returns to Normal Operations mode and performs input
selection.
Before making adjustments
NTSC
PAL
VGA mode
PC9800 ® normal mode
Macintosh ® 13-inch mode
FACTORY
NTSC
PAL
VGA mode
PC9800 ® normal mode
Macintosh ® 13-inch mode
FACTORY
Action
AJY
POF
'
STANDBY/ON
MENU
* All main-body operation-panel
'
buttons are valid.
<Ver. 2.1>
111