Pioneer PDP-V401 Technical Manual page 41

<Reference> After installation, measure the temperatures in the area shown in the figure below to make sure
that the values are within the specified range.
Intake side
Room temperature
+ 5 °C or less
* Using our multi-installation fixture (PDM-4001) eliminates the need to set the temperature after
installation.
For the installation conditions for the multi-installation fixture (PDM-4001), see the next page.
Special installation (Installation under the floor)
Exhaust side
(temperature of the
exhaust from FAN)
Room temperate
+ 15 °C or less
41
<Ver. 2.1>