Before making adjustments
5.1 Before making adjustments
This machine can be adjusted by three methods:
• Operation panel of the plasma display main body
• Remote control
• PC (RS232C control)
Before starting adjustments, make sure you have thoroughly read and understood this section.
5.1.1 Operation mode
This machine may be used in four operational modes. Mode transition is described on page 111.
1) Normal operations mode
This mode reproduces images, with power turned on.
The following actions are performed in this mode:
• Movement to STANDBY mode (POWER OFF)
• Input switching
• Switching color modes 1/2 (RS232C only)
• KEY LOCK/UNLOCK switching (using the buttons on the main body only)
• Movement to menu mode and RS232C adjustment mode
(This mode cannot be used to adjust or set those items.)
2) Menu mode
This mode is used for quality and phase adjustment.
Adjustments can generally be made from the following positions, though specifics will differ:
• Operation panel of the plasma display main body
• Remote control
For more information, refer to "5.2 Performing adjustments on the plasma display operation panel and the remote
control, 5.2.1 Menu mode". This mode allows you to alter adjustment data within certain ranges, around the value
adjusted in integrator mode or RS232C adjustment mode as described later.
106
<Ver. 2.1>