4) Mounting the monitor fixing bolt to the plasma display
1. Mount the monitor fixing bolt at four points on the rear of the plasma display.
14-M8 (with φ 16 hole rivet)
2. Mount the assembled metal fixture to the wall.
Mount the assembled metal fixture to the wall, using screws or bolts, attaching at a minimum of four points
(shown below as b). The choice of screws or bolts here should be made based on the specific composition and
strength of the wall.
Mount the fixture after checking the strength of the wall and beams.
Mounting standard metal fixtures (PDK-4006)
Caution: Mount one of the four groups bs to the wall at four points
Make the end of the
nut 4 flush with the