Mounting standard metal fixtures
(Stand: an accessory to PDP-V401 <PDP-V401E>)
4.3 Stand (an accessory to PDP-V401 <PDP-V401E>)
4.3.1 Installing the stand
Attach the stand to the display
using M8 commercial screws
whose length equals the thickness
of the table to which the fixture is
attached plus 25 mm.
Remove hole rivets A and A' with
a coin or the like.
This unit weighs 30.8 kg <31.6 kg>. In
addition, it is unstable due to its small depth,
and should be unpacked and carried by at
least two persons.
< > shows the PDP-V401E.
Insert the main body of the plasma
display into the stand.
Fix the main body to the stand with
the washers and bolts provided.
For this work, use a hexagonal