Download  Print this page

Advertisement

Before making adjustments

5.1.5 Last memory

On this machine, the items below are saved as the latest data in the memory, except when the following is performed
without satisfying memory timing requirements:
Turning off main power
Removing the power cord from the plug socket
Turning off the plug socket breaker
Note: <DIN> command by RS232C (Inhibit command for the OSD display) is not saved as the latest data in the memory.
No.
ITEM
1
STANDBY/ON
2
Input function
3
Color mode
4
BAUD RATE
112
<Ver. 2.1>
Approx. 4 seconds after operation
When the system is controlled through the main body operation panel or the
remote control
Approx. 4 seconds after operation
Controlled with the RS232C command
When switching is performed within RS232C adjustment mode and:
a)
when STANDBY status is activated
b)
when the non-operational period lasts approx. 30 seconds and the
OSD indication disappears
c)
when switching to Normal Operations mode using the <AJN>
command
d)
when switching to Normal Operations mode by pressing the main-
body operation-panel button
e)
when switching to Normal Operations mode after the input signal is
switched externally
f)
when switching to Menu mode by pressing the MENU button
g)
when switching to Normal Operations mode by pressing the button
on the main body operation panel or remote control, in KEY LOCK
status
Note: When switching is performed in Normal Operations mode, data is not
saved as the latest data in the memory.
When the system is controlled through the main body operation panel or the
remote control.
Approx. 4 seconds after setting by the SET button
Controlled with the RS232C Command
When switching is performed within RS232C adjustment mode and:
a)
when STANDBY status is activated
b)
when the non-operational period lasts approx. 30 seconds and the
OSD indication disappears
c)
when switching to Normal Operations mode using the <AJN>
command
d)
when switching to Normal Operations mode by pressing the main-
body operation-panel button
e)
when switching to Normal Operations mode after the input signal is
switched externally
f)
when switching to Menu mode by pressing the MENU button
g)
when switching to Normal Operations mode by pressing the button
on the main body operation panel or remote control, in KEY LOCK
status
Note: When switching is performed in Normal Operations mode, data is not
saved as the latest data in the memory.
When the system is controlled through the main body operation panel or the
remote control.
Approx. 4 seconds after setting by the SET button
Controlled with the RS232C Command
Approx. 4 seconds after operation
MEMORY TIMING

Advertisement

Table of Contents

   Related Manuals for Pioneer PDP-V401

Comments to this Manuals

Symbols: 0
Latest comments: