Download  Print this page

Advertisement

Special installation (Wall embedding (vertically wall-embedding equipment))
(2) When there is open space behind the wall and the angle (shape) as shown in the figure can be maintained on
the wall back:
30°
Exhaust
100
100
mm
mm
X
MAX. 20 mm
(both top and
bottom)
30°
Securing method: Basically, the unit is secured as indicated below. Keep open all areas other than the shaded parts.
The fixing method marked
When the unit is fixed on a structure, select a structure of the proper thickness and height. Care
must also be taken regarding the number of fixing bolts to be used (see "3.4.1 Fixing on a structure").
<Correct>
Beams
30°
If the rear wall is tilted at 30° or less, the X, Y space temperature can be
set up to 35 °C, regardless of the wall thickness.
Y
MAX. 20mm
X
Y
cannot be used for the unit.
Bad example of blocking exhaust
<Incorrect>
30°
Beams
47
<Ver. 2.1>

Advertisement

Table of Contents

   Related Manuals for Pioneer PDP-V401

Comments to this Manuals

Symbols: 0
Latest comments: