Creating A Text Comment File - FLIR ThermaCAM P65 HS User Manual

8.5

Creating a text comment file

Follow this procedure to create a text comment file to be used in the camera:
Step Action
1 Using any ASCII text editor (Notepad, Wordpad etc), type the first label within
brackets:
<Company>
2 On the next line, type the value, but this time without brackets:
FLIR Systems
3 The final result should look like this:
<Company>
FLIR Systems
4 If you want to add more labels and values, simply repeat the procedure – like this:
<Company>
FLIR Systems
<Building>
Workshop
<Section>
Room 1
<Equipment>
Tool 1
<Recommendation>
Repair
5 Save the file to Desktop and change the file extension to .tcf.
6 Transfer the *.tcf file to your PDA. You can also move the file to the camera using
the CompactFlash™ card.
7 Beam the file from the PDA (or laptop) to the camera.
For more information about beaming text comment files, see section 10.2.2.7.1 –
Beaming a text comment file to the camera on page 93.
8 You can now use the file to add text comment to your infrared images.
For more information about adding text comments, see section 10.2.2.7 – Text
comment on page 92.
Publ. No. 1558240 Rev. a156 – ENGLISH (EN) – March 1, 2006
8 – Tutorials
8
55