FLIR ThermaCAM P65 HS User Manual page 73

10397303;a3
Figure 8.7 Attaching the remote control
Step Action
1 Firmly hold the camera in your left hand and hold the remote control in your right
hand.
2 Align the remote control handle with the camera handle so that the rear end of the
remote control handle mates with the rear spring-loaded latch.
3 Pull the remote control handle backwards and then push it down – towards the
camera handle – to lock it between the two latches.
Publ. No. 1558240 Rev. a156 – ENGLISH (EN) – March 1, 2006
8 – Tutorials
8
63