Digital Video; Bluetooth - FLIR ThermaCAM P65 HS User Manual

10 – Camera program
10.2.5.5
➲ Depending on your camera configuration, one of the digital video modes (DV or
DCAM) may be an extra option.
10402903;a2
Figure 10.56 Digital video dialog box
Figure 10.57 Explanations of the Digital video dialog box
Label
Mode
Link
10.2.5.6
10
10567603;a2
Figure 10.58 Bluetooth® dialog box
➲ Depending on your camera configuration, this feature may be an extra option.
Follow this procedure to connect a Bluetooth® headset to the camera:
Step
1
2
3
120
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com

Digital video

Value
DCAM
■
DV
■
Active
■
Idle
■
Bluetooth®
Action
On your headset, set up the Bluetooth® bond. For information about how to do
this, consult the documentation for the headset.
In the dialog box above, click Scan. The camera will now scan for devices enabled
for Bluetooth® and list these in the dialog box.
Select the headset by moving the joystick up/down.
Comments
➲ Disconnect the FireWire cable from the camera
before carrying out this procedure.
Move the joystick left/right to select digital video
mode (DV or DCAM).
➲ Link status settings should only be changed
when DV mode is selected above.
When establishing a connection between the
■
camera and a passive digital video unit – such
as a DV recorder – the image transmission
needs to be activated from the camera. To do
this, move the joystick left/right to select Active.
When establishing a connection between the
■
camera and an active digital video unit – such
as a PC – the unit itself will activate and deacti-
vate the image transmission.
Publ. No. 1558240 Rev. a156 – ENGLISH (EN) – March 1, 2006