Analysis Menu; Edit Mode; Add Spot - FLIR ThermaCAM P65 HS User Manual

10 – Camera program
10.2.3
10.2.3.1
Point to Edit mode and press the joystick to enter the edit mode of the camera. When
the camera is in edit mode you can select, move, and resize measurement markers
as well as changing levels of isotherms etc. You leave edit mode by pressing the C
button.
10.2.3.2
Point to Add spot and press the joystick to add a spot. A spot will now be displayed
on the screen. Press and hold down the joystick for one second when the spot is
selected to display a shortcut menu.
10390103;a3
Figure 10.18 Shortcut menu for Spot
Figure 10.19 Explanations of the shortcut menu for Spot
Command
Delete
Exit edit mode
Set as ref temp
10
Settings
Point to Settings and press the joystick to display a Spot settings dialog box where
you can change the settings for the spot.
98

Analysis menu

Edit mode

Add spot

Explanation
Point to Delete and press the joystick to delete the spot.
Point to Exit edit mode and press the joystick to exit the edit mode.
Point to Set as ref temp and press the joystick to use the spot tem-
perature as the reference temperature.
See below.
Publ. No. 1558240 Rev. a156 – ENGLISH (EN) – March 1, 2006