Label
Attribute
Label
10.2.3.7
Add diff
Point to Add diff and press the joystick to add a difference calculation, which will
appear in the result table.
For more information about difference calculations, see section 10.2.5.2 – Difference
on page 116.
10.2.3.8
Ref temp
10391403;a3
Figure 10.39 Reference temperature dialog box
The reference temperature can be used when the camera calculates temperature
differences
Point to Ref temp and press the joystick to set the temperature
■
To change the temperature, move the joystick up/down
■
Press the joystick to leave the dialog box
■
10.2.3.9
Remove all
Point to Remove all and press the joystick to remove all measurement functions and
markers from the screen.
Publ. No. 1558240 Rev. a156 – ENGLISH (EN) – March 1, 2006
Value
Transparent
■
Solid
■
On
■
Off
■
Comments
Selecting Transparent will add some transparency
to an isotherm color, making it easier for you to
see objects through the color.
To make the isotherm colors appear solid, select
Solid.
Selecting On will assign a label to the measure-
ment marker (a small box with a number).
10 – Camera program
109
10