Save - FLIR ThermaCAM P65 HS User Manual

10.2.5.3

Save

10568003;a2
Figure 10.49 Save Setup dialog box
Figure 10.50 Explanations of the Save Setup dialog box
Label
Prompt text comment
Prompt voice comment
Prompt visual
Image naming
Overlay
Figure 10.51 Naming based on unique counter – explanations
Typical syntax: IR_nnnn.jpg
IR or DC or SEQ or AVI
nnnn
Publ. No. 1558240 Rev. a156 – ENGLISH (EN) – March 1, 2006
Value
No
■
Yes
■
No
■
Yes
■
Yes
■
No
■
Unique counter
■
Date
■
Directory
■
On
■
Off
■
Comments
If Yes is selected, the text comment dialog box will
appear when you save an image. This function
gives you a chance to add a text comment to the
image
If Yes is selected, the voice comment dialog box
will appear when you save an image. This function
gives you a chance to add a voice comment to the
image
If Yes is selected, the camera will change to visual
mode when you save an image. This function gives
you a chance to add a visual image to the infrared
image.
For a detailed explanation, see below.
If On is selected, all on-screen graphics will be
■
saved together with the image
If Off is selected, only the image (together with
■
any temperature information) will be saved
➲ The difference between images saved with or
without on-screen graphics will only be evident
when looking at the images using a third-party
image viewer.
IR = infrared image
■
DC = visual image
■
SEQ = sequence image
■
AVI = Audio Video Interleave
■
Unique counter
10 – Camera program
117
10