FLIR ThermaCAM P65 HS User Manual page 118

10 – Camera program
Command
Below
Interval
Dual Above
Dual Below
Settings
Point to Settings and press the joystick to display an Isotherm settings dialog box
where you can change the settings for the isotherm.
10397403;a3
Figure 10.37 Isotherm dialog box
Figure 10.38 Explanations of the Isotherm dialog box
Label
10
Type
Level
Width
Color
108
Explanation
All pixels with a temperature lower than a set temperature will be
colored with the same preset isotherm color.
All pixels with a temperature within the set interval will be colored
with the same preset isotherm color.
All pixels in two consecutive temperature ranges above a set temper-
ature will be colored with two different preset isotherm colors.
All pixels in two consecutive temperature ranges below a set temper-
ature will be colored with two different preset isotherm colors.
See below
Value
Interval
■
Above
■
Below
■
Dual Above
■
Dual Below
■
User-defined
User-defined
Configuration-depen-
dent
Comments
For an explanation of isotherm types, see above.
The temperature level in degrees Celsius (°C) or
degrees Fahrenheit (°F).
The temperature width in degrees Celsius (°C) or
degrees Fahrenheit (°F).
The colors used for the isotherm.
Publ. No. 1558240 Rev. a156 – ENGLISH (EN) – March 1, 2006