FLIR ThermaCAM P65 HS User Manual page 116

10 – Camera program
Label
Emissivity table
T Reflected
Distance
Result
Orientation
Mode
10
106
Value
User-defined
User-defined
User-defined
Min
■
Max
■
Avg
■
Horizontal
■
Vertical
■
Full
■
Aligned
■
Comments
Press Emissivity table to display an emissivity
table on the screen.
You can use this emissivity table to find emissivities
for a number of different materials. An emissivity
table can be created and edited in FLIR Systems's
PC software.
➲ The emissivity file can be stored at root level or
at directory level. However, the camera software
prioritizes files that are stored at directory level and
the directory has to be selected in order to store
the emissivity file in the camera memory. If the
camera software does not find an emissivity file at
directory level, it searches for similar files at root
level and saves those instead.
You can set T Reflected if Local is enabled. If not,
this option will be shaded.
You can set Distance if Local is enabled. If not,
this option will be shaded.
Point to Max, Min or Avg and press the joystick to
change how the line displays the measurement
results
Point to Horizontal or Vertical and press the joy-
stick to make the line horizontal or vertical.
Point to Full and press the joystick to make the
line be of the same width or height as the screen.
Point to Aligned and press the joystick to make
the line be of the same width or height as the pro-
file box.
Publ. No. 1558240 Rev. a156 – ENGLISH (EN) – March 1, 2006