Alarm - FLIR ThermaCAM P65 HS User Manual

10.2.5.4

Alarm

10439703;a2
Figure 10.54 Alarm Setup dialog box
Figure 10.55 Explanations of the Alarm setup dialog box
Label
Type
Function
Identity
Output
Alarm temp
Set from ref temp
Delta alarm
Ref temp
Publ. No. 1558240 Rev. a156 – ENGLISH (EN) – March 1, 2006
Value
Off
■
Above
■
Below
■
Configuration-depen-
dent
Configuration-depen-
dent
Silent
■
Beep
■
User-defined
Yes
■
No
■
N/A
User-defined
Explanation
Select Off to disable the alarm.
■
Select Above to assign an alarm color to all
■
pixels above the alarm temperature.
Select Below to assign an alarm color to all
■
pixels below the alarm temperature.
Select any one of the measurement functions to
define which function's temperature value should
trigger the alarm.
Select a number to assign an identity to the func-
tion above.
Select Silent to make the background of the
■
corresponding measurement function turn red
when an alarm is triggered
Select Beep to additionally make the camera
■
trigger a beep when an alarm is triggered.
Enter a temperature value by pressing the naviga-
tion pad left/right.
Select Yes or No to define whether the alarm tem-
perature should be set from the reference temper-
ature of the camera or not.
Enter an delta alarm value by pressing the naviga-
tion pad left/right.
For information purposes only.
The reference temperature is calculated and updat-
ed 'on the fly'.
10 – Camera program
119
10