Step
Action
9
After having carried out the same procedure on the following 9 persons, you can
do one of the following:
Actively continue to sample every new person by the F1 or F2 button, and let
■
the camera update the reference temperature
Stop sampling and let the camera trigger an alarm as soon as the alarm condi-
■
tions are met (> reference temperature + delta alarm value)
8.4.2
Setting up a silent alarm
Step
Action
1
Press the joystick to display the menu bar.
2
Point to Alarm on the Setup menu and press the joystick to display the Alarm
setup dialog box.
3
Select Type by pressing the joystick left/right. This setting defines whether the
alarm should be triggered when the temperature exceeds or drops below the alarm
temperature.
4
Select Function by pressing the joystick left/right. This setting defines what mea-
surement function should be used to trigger the alarm.
5
Select Identity by pressing the joystick left/right to assign an identity to the function
selected above.
6
Select Output by pressing the joystick left/right until Silent is highlighted.
7
Specify the Alarm temp by pressing the joystick left/right.
➲ Alarm temp will only be available if Set from ref temp has been disabled below.
8
Specify whether the alarm temperature should be set from the reference tempera-
ture or not by pressing the joystick left/right.
9
Specify Delta alarm by pressing the joystick left/right.
➲ Delta alarm will only be available if Set from ref temp has been enabled above.
8.4.3
Setting up an audible alarm
Step
Action
1
Press the joystick to display the menu bar.
2
Point to Alarm on the Setup menu and press the joystick to display the Alarm
setup dialog box.
3
Select Type by pressing the joystick left/right. This setting defines whether the
alarm should be triggered when the temperature exceeds or drops below the alarm
temperature.
Publ. No. 1558240 Rev. a156 – ENGLISH (EN) – March 1, 2006
8 – Tutorials
8
53