Text Comment - FLIR ThermaCAM P65 HS User Manual

10 – Camera program
edit a recorded comment, i.e. listen and/or add a comment at the end of the
■
recorded comment
overwrite an existing recording
■
Figure 10.13 Explanations of the Voice comment dialog box
Task
Recording a new voice comment, using the head-
set
Stopping the recording
Listening to a voice comment, using the headset
Saving the current voice comment
As a reminder to include important information about the infrared object in the voice
comment, you can display a checklist in an expanded voice comment dialog box.
You create this checklist in a simple text editor, save it as voicecomment.txt and
put it in the Images folder in the camera. When you open the voice comment dialog
box the next time, this checklist will be displayed. See the figure below.
10567903;a3
Figure 10.14 Voice comment dialog box, with checklist
10
10.2.2.7
Point to Text comment and press the joystick to display the Text comment dialog
box. Using the text comment feature, you can annotate images by using a file with
predefined text strings. Such a file can be created and edited in FLIR Systems's PC
software – for example, in ThermaCAM Reporter 7.0.
The concept of text comments is based on two important definitions – label and value.
The following examples explain what the difference between the two definitions is:
Figure 10.15 Definitions of label and value
Label (examples)
Company
Building
92

Text comment

Action
Move the joystick to select the Record button and
then press the joystick.
Move the joystick to select the Stop button and
then press the joystick.
Move the joystick to select the Play button and
then press the joystick.
Move the joystick to select the Save button and
then press the joystick, or press the S button.
Value (examples)
FLIR Systems
Workshop
Publ. No. 1558240 Rev. a156 – ENGLISH (EN) – March 1, 2006