Laying Out & Moving A Circle; Laying Out & Moving A Line; Creating & Changing An Isotherm - FLIR ThermaCAM P65 HS User Manual

Step Action
2 Point to Add box on the Analysis menu and press the joystick. A box will now
appear on the screen. The measured temperature will be displayed in the result
table in the top right corner of the screen.
You are now in edit mode and can move the box in any direction by pressing and
moving the joystick. To leave the edit mode, press the C button twice. You can
also leave the edit mode by holding down the joystick for a few seconds, which
will display a shortcut menu.
For more information about boxes, see section 10.2.3.3 – Add box on page 100.
8.3.3 Laying out & moving a circle
Step Action
1 Press the joystick to display the horizontal menu bar.
2 Point to Add circle on the Analysis menu and press the joystick. A circle will now
appear on the screen. The measured temperature will be displayed in the result
table in the top right corner of the screen.
You are now in edit mode and can move the circle in any direction by pressing
and moving the joystick. To leave the edit mode, press the C button twice. You
can also leave the edit mode by holding down the joystick for a few seconds,
which will display a shortcut menu.
For more information about circles, see section 10.2.3.4 – Add circle on page 102.
8.3.4 Laying out & moving a line
Step Action
1 Press the joystick to display the horizontal menu bar.
2 Point to Add line on the Analysis menu and press the joystick. A line will now ap-
pear on the screen. The measured temperature will be displayed in the result table
in the top right corner of the screen.
You are now in edit mode and can move the line in any direction by pressing and
moving the joystick. To leave the edit mode, press the C button twice. You can
also leave the edit mode by holding down the joystick for a few seconds, which
will display a shortcut menu.
For more information about lines, see section 10.2.3.5 – Add line on page 104.
8.3.5 Creating & changing an isotherm
Step Action
1 Press the joystick to display the horizontal menu bar.
Publ. No. 1558240 Rev. a156 – ENGLISH (EN) – March 1, 2006
8 – Tutorials
8
49