Add Line - FLIR ThermaCAM P65 HS User Manual

10 – Camera program
Label
Result
Show Max/Min
10.2.3.5
Point to Add line and press the joystick to add a line. A line will now appear on the
screen. Press and hold down the joystick for one second when the line is selected
to display a shortcut menu.
10390703;a3
Figure 10.30 Shortcut menu for Line
Figure 10.31 Explanations of the shortcut menu for Line
Command
10
Delete
Exit edit mode
Show profile
Set as ref temp
Cursor
Max
Min
104
Value
Min
■
Max
■
Avg
■
On
■
Off
■

Add line

Explanation
Point to Delete and press the joystick to delete the line.
Point to Exit edit mode and press the joystick to exit the edit mode.
Point to Show profile and press the joystick to display a profile
window. The profile window displays the different temperature levels
along the line as a graph.
Point to Set as ref temp and press the joystick to use the line tem-
perature as the reference temperature.
Point to Cursor and press the joystick to display a cursor that you
can move along the line.
Point to Max and press the joystick to display the maximum temper-
ature along the line.
Point to Min and press the joystick to display the minimum temper-
ature along the line.
Comments
To change how the circle displays the measure-
ment results, select Max, Min, or Avg.
To display two moving cursors inside the circle,
continuously indicating the maximum and mini-
mum temperature, select On.
Publ. No. 1558240 Rev. a156 – ENGLISH (EN) – March 1, 2006