Add Circle - FLIR ThermaCAM P65 HS User Manual

10 – Camera program
Label
Result
Show Max/Min
10.2.3.4
Point to Add circle and press the joystick to add a circle. A circle will now appear on
the screen. Press and hold down the joystick for one second when the circle is selected
to display a shortcut menu.
10390503;a3
Figure 10.26 Shortcut menu for Circle
Figure 10.27 Explanations of the shortcut menu for Circle
Command
Delete
10
Exit edit mode
Set as ref temp
Max
Min
Avg
Settings
Point to Settings and press the joystick to display a Circle settings dialog box where
you can change the settings for the circle.
102
Value
Min
■
Max
■
Avg
■
On
■
Off
■

Add circle

Explanation
Point to Delete and press the joystick to delete the circle.
Point to Exit edit mode and press the joystick to exit the edit mode.
Point to Set as ref temp and press the joystick to use the circle
temperature as the reference temperature.
Point to Max and press the joystick to display the maximum temper-
ature of the circle.
Point to Min and press the joystick to display the minimum temper-
ature of the circle.
Point to Avg and press the joystick to display the average tempera-
ture of the circle
See below.
Comments
To change how the measurement results will be
displayed, select Max, Min, or Avg.
To display two moving cursors inside the box,
continuously indicating the maximum and mini-
mum temperature, select On.
Publ. No. 1558240 Rev. a156 – ENGLISH (EN) – March 1, 2006